SLIDING TO THE FUTURE
Ditec DAS200 is designed around the needs of convenience and safety of all customers, using the most advanced technologies and premium materials and components. Because of that, it can also offer great performances in terms of clear passage opening, maximum weight of the wings, which can be mounted on DAS200, and opening and closing time performances.
Smart things
Ditec offers two different App based solutions
ENTREMATIC DOOR CONNECT
Free App available on Play Store and App Store.
For use with latest generation Bluetooth-equipped COM501 and COM502 program selectors, offering the end user access to the following features:
- 5 functions, including RESET:
- Download and send events and statistics log
- Download and send error log
- Add and manage App users (up to 7)
- Manage setting of partial opening and timer-controlled automatic closing parameters
SLIDER CONFIGURATION TOOL
An advanced software (DAS900CT) for installers, allowing the complete configuration and management of DAS200 doors from a tablet or handheld device (requires DAS900CTI interface).
This software offers the installer the following features:
- Usage of 5 controller functions, including RESET
- Configure all parameters of the control panel
- Download and upload preset parameter configurations
- Manage events and errors log
- Manage complete statistics log
- Manage and schedule maintenance
QUALITY AND RELIABILITY:
- Performing electromechanical operator for up to 280 kg door weight
- Tested up to 1 Million cycles
- Long-lasting automation with 24 V DC DUNKERMOTOREN™ with built-in Encoder
- Reinforced techno-polymer wheels in DUPONT™ Delrin®
- Fully certified and tested by TÜV SÜD
Easy to install:
- PLUG & PLAY connectors for Ditec range of sensors
- Smart start-up mode with self-acquisition function, including automatic detection and recognition of:
– Passage opening
– Door weight
– Presence and type of lock devices (standard and anti-panic)
– Emergency and backup batteries - Superior energy efficiency with a switching power supply unit offering a wide range of operating voltages
Technical data:
- Gearmotor: 24 V DC with encoder
- Power supply: 100 V ÷ 240 V 50/60 Hz
- Max nominal power: 75 W
- Auxiliary power: 0.64 A @ 24 V DC
- Operating temperature: -20°C / +50°C
- Protection rating: IP20
- Dimensions (H x D x L): 120x185xL mm
- Max operator lenght: 6650 mm
FRAME SYSTEMS
DITEC PAM30
The PAM 30 series consists of aluminium profiles for 1 wing, 2 wings or telescopic automatic sliding doors, with fanlights and fixed walls, which positions itself between the PAM 16 and the ALU48 series. It is far sturdier then the PAM 16 series and can hold 8 to 23 mm thick glazing, whilst it is far thinner than the ALU48 series.
Distinctive features of the system
PAM 30, designed to be compatible with current and future automations, consists of a set of visible reduced sections, 30 mm thick profiles.
By using 3 different types of seals, it is able to hold 8/9 mm, 10/11 mm e 22/23 mm unbreakable glasses; supplied in the mill finish and anodised aluminium (EURAS C0) version.
It is also fitted with an adjustable, floor recessed guide, suitable for 1 or 2 wings sliding openings and telescopic openings.
Benefits
The PAM 30 series ensures several benefits, such as:
- very easy machining, assembly and installation ensured by: 90° cuts, self-threading screws;
- full compliance with safety international standards;
- alignment of top and bottom crosspieces;
- side closure between wings and frame separated by a pressure seal;
- centrally closed wings with dual stop, dual snap-on seal;
- photocells inserted between the fixed panel or in special wall mounted profiles, when wings only are fitted (only countries outside the EU);
- profiles with totally smooth visible front, with no grooving;
- in the wing bottom section lower profile housings are available to allow runner operation and to insert the floor seal brush.
DITEC alu48
The ALU48 series is an aluminium profile system specifically designed to make up frames with very quick and simplified machining, installing and commissioning operations.
The system is dedicated to 1 wing, 2 wings or telescopic automatic sliding doors, including those with fanlight and fixed walls, in the standard version and in the wing breakout anti-panic or full breakout versions.
Distinctive features of the system
ALU48, designed to be compatible with current and future automation systems, includes a range of 48-mm-thick profiles, equipped with large vertical profiles, with sturdy visible sections, for all Standard, Telescopic, Transom and Wall types. Prepared to house various types of locks for closing the mobile wings.
The system can accommodate all types of glass, from 8-40 mm thicknesses, without protruding frames. It comes in mill finish or anodised (EURAS C0) aluminium bars. As an alternative, it has an adjustable floor guide track that is suitable for both 1- or 2-wing sliding and telescopic entrances.
Benefits
The benefits ensured are listed below:
- the fixed components can be installed with self-compensating profile for the surround;
- easier offset of any installation errors;
- the fixed panels are fully independent;
- identical assembly screws are used, ensuring a faster operation;
- simpler machining operations as the wings and fixed panels can be cut at 90°;
- the bottom and top crosspieces can be aligned;
- the wings are centrally closed with a double stop, double slot-in seal;
- the profiles are smooth, without grooving;
- better seal with special brushes.
