
ENTREMATIC ZEN: THE TRANSMITTER SUITABLE FOR EVERY NEED
Entrematic ZEN is the new line of 2 channel and 4 channel remote controls.
The transmitters are available in various colours and in two operating frequencies, 433.92 MHz or 868.35 MHz.
Each transmitter is ready to transmit using various protocols: Entrematic rolling code, fixed code, Dip Switch, and the new AES 128-bit Encrypted mode and Protected mode protocols. Guaranteed compatibility with existing Ditec Entrematic receivers and installations.
The remote control can be configured in standard mode either by means of acquisition from the receiver or by cloning pre-programmed transmitter, but further additional functionality is available thanks to the ZENPAD programming unit and the ZEN MANAGER software.
Maximum protection
The transmitters are ready to transmit an AES 128-bit encrypted signal that is suitable for safety applications, making it impossible to clone
Technical features
- Radio transmitters with 2 channels or 4 channels
- Different colors: Black, White, Blue, Green, Red, Yellow, Black with chrome insert, Dark grey with chrome insert
- Versions with 433.92 MHz or 868.35 MHz frequency
- Rolling code with over 4 billion combinations
- Fixed code versions compatible with MM53200 protocol and other remote controls with dip switches
WALL-MOUNTED PHOTOCELL, RADIO DIGITAL KEYPAD, KEY-OPERATED SELECTOR SWITCH, PHOTOCELLS AND VERTICAL MOUNTINGS

Entrematic AXR7 is a control system that uses transponder RFID technology that enables reading and recognition of a coded button or card by proximity or swiping.
It consists of one or two AXR7 units connected to the LAN7S control unit, which stores the individual codes of the single cards or buttons. The coded information is electromagnetically exchanged. Both the card and the button feature a non-volatile code memory and do not therefore require internal batteries.
Ideal for running entrance systems of companies, condominiums or wherever only duly authorised persons have access. Codes are saved in the memory using a simplified learning procedure.
Entrematic AXR7 can be installed on a wall or on an AXC100 vertical mounting in die-cast aluminium.

Radio digital keypad 4-Ch to control the automation using 4 customisable numeric codes. Two power supply options: with 9 V DC battery or through connection to 24 V DC electrical control panel.
- The signal is transmitted to the control panel using one of the Entrematic radio protocols: fixed code, rolling code, AES-128bit Encrypted, PROTECTED Mode
- Possibility of configuration using ZEN Pad and SW ZEN Manager
- 433.92 MHz (AXK4) and 868.35 MHz (AXK4P) versions
- Back-lit keypad and integrated light for status signals
AXK4 and AXK4P can be mounted on a die-cast aluminium vertical mounting of height h=1000 mm or on a wall.
This accessory aesthetically match other system accessories (AXP2 photocells, AXR7 transponder technology control device with proximity control, etc.) guaranteeing a well-coordinated design.
Key-operated selector switch on wall (Entrematic AXK5M) and semi-recessed (Entrematic AXK5I) with European cylinder.
- Burglar-proof with metal body
- Microswitches electrical contacts are protected by a metal container
- The semi-recessed version is compatible with standard ø 57 mm boxes
Selector switches without cylinder on wall (Entrematic AXK5NM) and semi-recessed (Entrematic AXK5NI).
- Burglar-proof with metal body
- Useful if you already have the cylinder with the necessary mapping
- Compatible with half cylinder type EURO (DIN) 30/10
AXK5I and AXK5NI semi-recessed selectors can also be mounted on die-cast aluminum vertical mounting of height h=1000 mm (AXC100).
This accessory aesthetically match other system accessories (AXP2 photocells, AXR7 transponder technology control device with proximity control, etc.) guaranteeing a well-coordinated design.

Entrematic AXP2, LIN2 e LAB4 are safety devices using modulated infra-red ray. These devices which operate on a double relay system, are compliant with the most stringent technical standards as required by applicable regulations. They are reliable over time and simple to install thanks to a different design that adapts to all types of installation:
- photocell AXP2 aesthetically matches the other control devices: wall-mounted photocell with reduced thickness (25 mm). Configurable capacity: max 10 m or max 30 m to limit any interference. In an ABS plastic shell.
- photocell LIN2 with 3-positions orientable card is particularly suited for small vertical mountings and installations within a passageway thanks to its limited dimensions.
- photocell LAB4 is ideal for industrial applications. Version with a battery operated transmitter.
Designed with elegant and clean lines, this line of product is suitable for any type of frame, both modern or traditional, residential or industrial.
The photocells come single, with vertical mountings or with vertical mountings and a functional base, which has been specifically designed to make installation easier when needed.
Vertical mountings
Made of anodised (for LIN2) or die-cast aluminium (for AXP2), this is the right solution to complete every automatic entry system, and is suitable for the installation of photocells, digital selectors and keypads. Refined designe that makes it suitable for any type of frame. Utmost application functionality: can be fitted to floors or walls. Simple and quick installation. Specially designed bases (AXCBS and LINBS).
FLASHING LIGHT

Entrematic FL is the line of flashing lights with a card-integrated LED.
Suitably configured, they can communicate automation-system movement or when a specific maintenance threshold is reached (with the last generation LCU control panels or as integrated in NeoS and TOP).
Available in two versions, one multi-voltage version with the flashing function that can be selected via jumper and a 24 V DC version, they come complete with 4 coloured tubes to customize notifications (white, blue, green, yellow, orange).
With appropriate mountings it is possible to install them on a wall or on small vertical columns (7 cm).
Thanks to their refined design and their reduced dimensions they can be adapted to any type of installation.